Which plate is better, aluminum or nylon?
This depends on what the skater prefers. Both nylon and aluminum plates have double action trucks, Nylon is slightly lighter, and this will only have a slight difference in the weight of the skates. W |
What size should I pick when ordering a set of plates?
If you ordered a new plate today, for a standard mount, order the same size as your boots. If you are a half size, I would suggest to order the next size up if you've been skating less than 2 years or |
What is the difference in plates?
Please review the below article courtesy of Sure Grip International.
Sooner or later everyone will ask the question, which plate is right for me? Which plate is
better? Which plate is lighter? |
What is the difference between “double action” and “single action” plate ?
The single action has one cushion, usually made of rubber or polyurethane, that sits top of the boss on the truck. The double action has two cushions, one above and one below the boss. The single acti |
Power Dyne Plate Size Selection Guide
|
What are the different parts of a roller skate?
A Roller Skate is made up of a few different parts, all of which are important for the skate. Below are some simple definitions for some of the most popular parts of the roller skate and inline skate. |
What is the Short Mount Theory?
Please review the below article courtesy of Sure Grip International.
Short Forward theory
The theory of the “Short” mounted plate is not a new theory but rather a new approach to the
old |
Can I build my own custom skate?
Of course! Many skaters would prefer to build their own skate. Just send us an email . Please put the boot ( size and color), plate , wheels, bearings, toe stops and your contact information.Then one |
How do I remove jump bars from my skates?
Jump bars can be removed from plates however it is not recommended by manufacturers as removing the jump bar can interfere with the structural support of the plate. |
How do I tell what size toe stop or plug I need for my skates?
If your skate has an adjustable toe stop then you will need 5/8' toe stop. If you have a non-adjustable toe stop then you need 5/16". Knowing what plate you have on your skates is helpful because this |
Did you know that you can send us any shoe you would like to transform into skates and we can create you a custom pair of skates?
Boots, tennis shoes - anything with a sole - can be turned into your own custom skate! You choose the plates, toe stops, bearings,and wheels! Please just Email Us with the components that you would li |
What is the difference between a toe stop and a toe plug?
A toe stop does stick out further and are made to help you stop, turn,and push off. Toe plugs are made just to plug the whole in your plate. They aren't made to assist you in stopping in anyway. Revie |
How do you attach toe caps to your skates?
Toe-savers Instructions
1. Remove toe stop,slip toe cap over skate to measure which lace to loop strap under.
2. Hold toe cap over the skate and loop strap under the lace and snap.
3. Put toe cap o |
