Can you replace the bearings without using a special tool? Yes you can.Here are some simple instructions.
Place the tip of a screwdriver in the center hole of the bearing and gently pry and move the screwdriver around the circumference until the bearing pops
How do I get the old bearings out of my existing wheels? You will need a Reflex Tool . You can use this tool to remove wheels from you skates and use it to remove bearings from the wheels. Use it for quick extraction of the axle bolt once it's loose.. It is
How easy is it to change your wheels? It is very easy to change your wheels. You will need the replacement set of wheels with the bearings already in them and a skate tool. Remove the wheel by using the skate tool. Remember, righty tighty
How often should I clean and lubricate my bearings? In a perfect world you should clean your bearings every time you use your skates, but taking the bearings apart and cleaning them is the most time consuming and dirty task. So the best way to tell if
How do I change the wheels on my quad skates? *Unscrew the nut from each wheel with your skate tool. Place the tool over the nut, and turn it counterclockwise until the nut comes off.
*Remove the wheels from their bolts.
*Put the new wheels
Why doesn't the Bones Bearings have an ABEC rating on them? Please review the below article courtesy of George A Powell Bones Bearings. We are often asked, “What ABEC rating are your bearings?” The answer is that “Bones Bearings are Skate
